Residential Inline Ultrasonic Flow Meters LCD Irrigation Mass Flow Measurement

Fixed Inline ultrasonic flowmeters by transit time multi-liquid velocity determine for slurry | effluent | sewage

General of ultrasonic flow meters

The UFM Ultrasonic flowmeters can determine the velocity of a fluid flowing in a pipe by sound waves. When it's in no flow conditions, an ultrasonic wave's frequencies are transmitted into a pipe and its reflections from the fluid are the same. When it's under flowing conditions, the frequency of the reflected wave is different due to the Doppler effect. When liquid media moves faster, the frequency shift increases linearly. The transmitter processes signals from the transmitted wave and its reflections to determine the flow rate.

The transit time type ultrasonic flowmeters can give and receive ultrasonic waves between the transducers in both the upstream and downstream in the pipe. While it's under no flow conditions, it takes the same time to travel upstream and downstream between the transducers. While it's under flowing conditions, the upstream wave will travel slower and take more time than the (faster) downstream wave. When the fluid moves faster, the difference between the upstream and downstream times increases. The transmitter processes upstream and downstream times to determine the flow rate.

Data sheet

Accuracy <1%

Flow rate 0 - 10m/s, bi-direction

Pipe diameter DN32 - DN6000 mm

Liquid temperature -30℃ - 160℃

Liquid type water, sea water, sewage, effluent, oil, alcohol, any single liquid that can

transmit ulstrasonic wave

Pipe material stainless steel, cast iron, copper, PVC, aluminum, fiber glass steel

Output one way 4-20mA, one way OCT pulse, one way replay

Input three way 4-20mA, PT1000 platinum resistor for heat measurement

Communication RS485, MODBUS

Data storage SD card

Power supply DC8-36V / AC85-264V

Protection IP65 (main body), IP68 (transducer)

Humidity <85% RH

Ambient temperature -20℃ - 60℃

Description:

The ultrasonic flowmeter is available with pipe type, clamp on and other options, it's designed for linear and bi-directional volumetric flow measurement of liquid. The measured flow datas can be output by standard analog or pulse or frequency. Through HMI user friendly operator interface, the unit can be set up for a wide range of applications. Next to actual volumetric flow measurement, the unit can be configured to perform flow totalization ( plus, minus, or sum). Measurement and output of the liquid sonic velocity can be configured too.

Optionally the unit can be set to perform one of the following additional functions:

• Calculate and output corrected standard volumetric or mass flow using external pressure & temperature inputs
• Batch function
• Heat function, combining T1, T2 and volume

Metering Diagram

Flow measurement Heat measurement

Reference chart

Optional temperature transducer

Industries

• Chemicals
• Petrochemicals
• Oil & Gas
• Heating, Ventilation & Air Conditioning (HVAC)
• Power Plants
• Water treatment

Liquid type

• Metering of cooling water
• Demineralisedwater
• Control of batching and blending operations
• Mass flow measurement
• Allocation measurement
• District heating
• Irrigation
• Energy measurement

Model Selection

Competitive Advantage:

• Compliance to international standards: ISO9001-2008 / GB/T19001 / MC00000-044/507
• CE approval
• Strict process control
• Advanced calibration equipment
• Engineer team

Focus on low-carbon energy and environment protection technology, we design and manufacture fluid processing and control products to give our contribution to the sustainable energy develop.

Lots of mega projects have been installed with our products, Shanghai expo center, Shanghai Disney energy center, Beijing Z15 tower, Malaysia GDC energy station, etc. Our technology and practical application experience, allow us to provide our client with products and solutions which meet your expectation on building, improving and mainting equipment. The industries we served:

• New energy
• Petroleum and chemical
• Industrial energy
• Oil and gas
• Metals and mining
• Pulp and paper
• Water and waste water treatment
• Marine
• Power
• Refining
• Food and beverage
• Life sciences

Our R&D, customer experience and manufacturing center is located in the “Low energy building science center” Hanghzou, China. As a Provincial class Postdoctoral workstation by collaboration with China State Energy research institute, which ensure our advantage from technician, science research & development, equipment. Our main products includes: flowmeters, roots air blower, pump, as well as design consultancy on RO, UF, NF design.