China Categories
3KW Photovoltaic Input Communication Solar Module for Telecom Power System
Ask Latest Price
Brand Name:ESTEL
Model Number:MS483000HG
Certification:ISO9001, CE, 3C, FCC, TLC
Price:negotiation
Payment Terms:L/C, D/A, D/P, T/T, Western Union
Supply Ability:20,000 sets per month
Company Data
Verified Supplier
Contact Person
Fiona Liang
Business Type:
Manufacturer Distributor/Wholesaler Exporter
Officials:
3A-8, SHUIWAN 1979 SQUARE (PHASE II), NO. III, TAIZI ROAD, SHUIWAN COMMUNITY, ZHAOSHANG STREET, NANSHAN DISTRICT, SHENZHEN
Quality:
Quality Certifitation Available
Visit Website
Product Details
Company Profile
Product Details
Electrical specifications
1.1 Input characteristics
| input voltage | 120Vdc to 425Vdc (starting voltage greater than 160Vdc) |
| Rated input voltage | 340Vdc |
| MPPT, voltage range | 120Vdc to 340Vdc |
| Maximum input current | 17A |
| surge current | Meet the standard: EN/IEC61000-4-5 |
| MPPT accuracy | ≥99%@load≥400W |
| Anti-polar protection | Input polarity error, no damage |
| Enter the insurance | Positive and negative pole insur- ance |
| maximum input voltage | 450Vdc (power supply cannot be damaged) |
1.2 output characteristic
1.2.1 Output voltage current adjustment rate
| output voltage | +54.5Vdc |
Output voltage setting value | +54.5±0. 1Vdc |
| Output voltage adjusta- ble range | +42Vdc～+58Vdc |
| productiveness | ≥96%@340Vdc/40%~70% Load-54.5VDC |
| Source effect | ±0. 1% |
| Load effect | ±0.5% |
| Stability accuracy | ±0.6% |
| minimum current | 0A |
| rated current | 55A@-48VDC |
| Output limit current setting point | 0-62.5A |
| peak point current | 62.5A |
Temperature coefficient (1/ ) | ≤±0.02% |
| Battery life | 10ms |
Standby power consumpt- ion | ≤4W |
| Maximum capacitive load | 40000uF |
| Maximum number of para- llel machines | 31 |
Note: The deviation of the setting value of various adjustable voltage and the setting value of protection voltage should not be higher than ±0.1V.
1.2.2 Output ripple and noise
| performance index | crest value | remarks |
Ripple and noise (peak-to-peak) | 200mVp-p | Bandwidth is less than or equal to 20M |
Note: 1) Ripple and noise test: Ripple and noise bandwidth is set at 20 megahertz.
1.2.3 Output dynamic response
Voltage overshoot | Jumping slope | variation in load | recovery time | Output overshoot |
+54.5V | 0. 1A/uS | 25% to 50% load, 50% to 25% load, 50% to 75% load, 75% to 50% load | ≤200us | ≤±5% |
| +58V | 0.1A/uS | 0% to 100% load, 100% to 0% load | No overvoltage is triggered protect |
Note: The load jump cycle is 4ms.
1.2.4 The output of the machine is out of control
| output voltage | variation in load | Output overshoot |
| +54.5V | Start overshoot | <1% |
1.2.5 available machine time
| project | 340Vdc@25℃ |
| Power on delay | 3S~8S |
Note: The time from power on to output voltage to 42Vdc.
1.2.6 Power conversion point
| input voltage | maximumoutput |
| 200Vdc～425Vdc | 3000W |
| 120Vdc～200Vdc | Linear reduction |
| 120Vdc | 1800W |
Note: When the pv input voltage is 340Vdc~425Vdc, the output power in this range is determined by the PV characteristics.
DC input derating curve
1.2.7 Output characteristics
Maximum output characteristic curve
1.2.8 Temperature reduction
| ambient temperature | maximumoutput |
| -40~50℃ | 3000W |
| 50～65℃ | Linear reduction |
| 65℃ | 2400W |
| 65～75℃ | Linear reduction |
| 75℃ | 1200W |
Ambient temperature derating curve
1.2.9 Noise voltage
| Noise voltage | crest value | remarks |
| Telephone weighing noise voltage | ≤2mV | |
Broadband noise volt- age | ≤50mV | 3.4～150KHz |
| ≤20mV | 150～30000KHz |
1.3 Defencive function
1.3.1 Output short circuit protection
| output voltage | remarks |
+54.5V | It can be short circuit for a long time, and can be automatically restored after the short circuit disappears |
1.3.2 Overvoltage protection output
Overvoltage protection can be categorized into internal overvoltage and external overvoltage protection. Internal overvoltage faults range from 58.5VDC to 60.5 VDC, which can be monitored and set; when a fault occurs, the module will lock out. If the external voltage exceeds 63VDC and remains above this level for more than 500ms, the module will also lock out. Once the system enters the locked-out protection state, the PV power supply must be disconnected before the system can be re-powered to resume operation.
1.3.3 Output under-voltage warning
The range is 37VDC~39VDC. When it i s lower than the under-voltage alarm value, normal output is reported and an alarm is given.
1.3.4 Overvoltage protection input
| input voltage | remarks |
430±5Vdc | Output is turned off and can be self-recovered after the voltage is normal |
| Input recovery point deviation> 15V |
1.3.5 Input under-voltage protection
| input voltage | remarks |
110±5Vdc | Output is turned off and can be self-recovered after the voltage is normal |
| Input recovery point deviation> 40V |
1.3.6 Underpower protection
Underpower protection logic:
In normal operation, when the input power is less than 50W and lasts for 5 minutes, the under-power flag is set and the machine shuts down. Otherwise (that is, in the shutdown state), when the input voltage is greater than 160V and the bus voltage is greater than 150V for 5 minutes, the under-power flag is cleared and the module restarts.
Minimum module power: 50W
1.3.7 Overtemperature protection
| temperature | remarks |
| ≤50℃ | The module can output the maximum output power without overtemperature protection, and the module runs normally |
| 50℃~65℃ | Module power is reduced to 2400W linearly |
| 65℃~75℃ | Module power is reduced to 1200W |
| >75℃ | Shut down, and the self-recovery temperat- ure difference after shutdown is> 10 |
1.4 Communication function between rectifier module and monito- ring module
The CAN bus communication mode is adopted between the rectifier module and the monitoring module, which supports remote software version upgrade, and the address board can be used to set the address of the module. When the AC input is disconnected, the module needs to communicate with the host.
The CAN interface in the rectifier module needs to adopt an isolation design. The power supply of CAN is +5Vdc, which is provided by the internal rectifier module.
The main monitoring information of the rectifier module is:
1) Voltage regulation and current regulation function: meet the requirements of battery equal float charge, meet the voltage regula- tion requirements;
2) Single module on/off control;
3) Protection and alarm information feedback:
Municipal power failure: municipal power failure (over or under voltage of AC input);
Module protection: temperature warning;
Module fault: shutdown due to output overvoltage, fan failure, shutdown due to overheating or no output caused by other internal reasons of the module; (the module is in the sleep shutdown state, and the module fault is not reported due to mains failure).
1.5 LED indicator
The power LED indicator is installed on the side of the power panel, and the output status is shown in the following table.
Indicative signs | Color of the indicator light | normal state | unusual state | Anomaly reason |
Power operation refers to Indicator light | hispid arthraxon | bright | go out | Photovoltaic input fault (no DC input, DC input over or under voltage), module no output. |
Protect the indicator light | yellow | go out | bright | Temperature warning (environmental tempe- rature exceeds 65 ~ shutdown over temper- ature); Sleep shutdown (when the module is in sleep shutdown, only the protection indicator light is on and the module does not report alarm). Communication interruption (the pr- otection indicator light flashes) |
fault indicating lamp | red | go out | bright | Output overvoltage shutdown, fan failure, overheating shutdown, no output caused by internal reasons of the module. |
Company Profile
Tianjin Estel Electronic Science and Technology Co.,Ltd
Introduction
Tianjin Estel Electronic Science and Technology Co., Ltd (ESTEL(GUANGDONG)TECHNOLOGY CO., LTD), located in China, is a professional supplier of integrated outdoor telecom cabinet and temperature control solutions for outdoor telecom base station. As a science and technology innovative company, we engage in the R&D, manufacture, and sales of telecommunication equipment. Estel has a well-established team of technical and management experts who can meet customers’ specific needs accurately.
The base station integrated solutions and products include outdoor integrated telecom equipment cabinet, battery cabinet, RRU cabinet, power supply cabinet, environment monitoring system, TEC peltier air conditioner, AC220V compressor air conditioner, DC48V variable frequency air conditioner, heat exchanger, rectifier, UPS, embedded telecom power system etc. All the above solutions and products can be custom made.
Our products and solutions have been deployed all over China. Our main domestic customers are China Telecom, China Mobile, China Unicom, State Grid, Shenzhen / Beijing Metro and Huawei / ZTE etc. In addition, our products have been exported to Europe, North America, South America, Central America, Southeast Asia, Africa, Australia, Mid East countries, etc.
“ Customers First, Quality First ” is always our principle. We have attained many certifications, such as ISO9001, ISO14001, OHSAS18001, CE, UL, FCC etc. AS a telecom integrated solutions / energy saving system integrator in China, We have strong advantages in technology competitiveness, management competitiveness ,service competitiveness and price competitiveness. Through many years of experiences in design, production and implementation of different projects around the world, we have gained great reputation. Relying on professional technique and strict quality control, we will continuously offer high cost-effective products and solutions to our respectable customers globally. We will always try our best to meet customers’ need and requirement.
Company Capability
Trade & Market
| Main Markets | Total Revenue (%) |
| Domestic Market | 50.00% |
| Africa | 15.00% |
| Southeast Asia | 10.00% |
| South America | 5.00% |
| Central America | 5.00% |
| Australia | 3.00% |
| Mid East | 3.00% |
| North America | 2.00% |
| Southern Europe | 2.00% |
| Eastern Europe | 1.50% |
| Northern Europe | 1.00% |
| Western Europe | 1.00% |
| South Asia | 1.00% |
| Eastern Asia | 0.50% |
Send your message to this supplier
You May Like
Hybrid Energy Telecom Power System With Solar Power Grid Diesel Generator Battery For Outdoor Telecom Site Power Supply
ET48200 M5E32A 2U Compact Telecom Power System High-Density 12KW Rack-Mount
48V100Ah Lithium Iron Phosphate Battery for Telecom Power System
Controller The Ultimate Solution for High-Performance Telecom Power System
MC2600 DC Power Controller - ARM Cortex-M4 , Manages 40 Rectifiers and Solar Modules
MR483000HG2B-GS 48V 3000W High Efficiency Rectifier Module Hot Swappable Wide Input Range 85 290VAC
MR484000SG1 75A High Efficiency Communication Power Module 96 Percent Efficiency Wide Input 85 300VAC Hot Swappable
Single Wall Stainless Steel 38U Outdoor Telecom Enclosure 750x700x2000 With DC Air Conditioner
Fiber Distribution Frame 3 Bays Outdoor Electronic Cabinet
Triple Bay Racking Outdoor Telecom Enclosure With Air Conditioner Cooling System
Custom Outdoor Telecom Cabinet , Telecom Equipment Cabinet With Air Conditioner
Integrated External Electrical Cabinets Anti Corrosion Outside Enclosures
19 Inch Rack One Front Door 42U Outdoor Communication Cabinets
Optical Fiber Distribution 3 Compartments Outdoor Telecom Enclosure
2 Compartments Outdoor Telecom Cabinet Galvanized Steel 4 Doors CE Certificated
Floor Mounted Outdoor Telecom Enclosure 19 Inch Flame Retardant Materials Anti Rust
Four Shelf Outdoor Battery Cabinet With Cooling
Three Battery Layers Integrated DC 48V Fans Outdoor Battery Cabinet
Stainless Steel Outdoor Battery Cabinet Temperature Control 3 Layer Battery For Telecom Station
Professional Outdoor Rack Cabinet Custom Electrical Enclosures ET9090210-BA
Fan Cooling Outdoor Battery Cabinet For Pole Mount / Wall Mount Auxiliary Direct Ventilation Holes
Heat Insulation PEF Battery Storage Cabinet Outdoor Rack Enclosure 3 Shelves Cooling
Double Wall Three Shelves Telecom Outdoor Cabinet Sunproof ISO9001 CE Certification
DC48V Air Conditioner Outdoor Battery Cabinet , Outdoor Server Cabinet
Dustproof Rainproof Outdoor Battery Cabinet , Outside Base Station Cabinet
Weatherproof Battery Outdoor Electronics Cabinet Anti Corrosion Coating
Waterproof Sinlgle Wall Outdoor Power Battery Cabinet / IP55 Outdoor Telecom Cabinet
Three Bay Telecom Shelter Outdoor Power Cabinet Cooling Base Station Cabinet
IP55 Outdoor Power Cabinet Three Bay Telecommunications Shelter With Air Conditioner Cooling
IP55 Outdoor Power Cabinet Galvanized Steel PDU Battery ODF DCDU With Air Conditioner
Emerson Rectifier / Battery Outdoor Power Cabinet Sandwich Structure Panel IP55
Heat Insulation Outdoor Power Cabinet , WeatherProof Power Supply Cabinet
Double Wall Aluminum AL5052 Outdoor Power Cabinet / Outdoor Telecom Cabinet With SNMP Monitoring
Aluminum Steel Thermostatic Outdoor Power Cabinet Cutomized 900×900×2100 mm
Sandwich Panel Outdoor Power Supply Cabinet Galvanized Steel Climate Controlled
Reasonable Layout Assembled Base Station Cabinet Outdoor Rack Enclosure With Battery Compartment
Inquiry Cart
0