Stainless Steel Bonnet Bolts Lightweight Resilient Seated Gate Valve

Stainless Steel Bonnet Bolts Lightweight Resilient Seated Gate Valve

Resilient Seated Gate Valve Design features:

Spindle’s gaskets O-ring - “DRY THREAD” - replaceable under pressure.

Stainless steel spindle with rolled thread and bearing.

Total sufrace rubbered wedge with replaceable spindle nut.

Resilient seated gate valve to EN 1074-1 and 2 / EN 1171, with WRAS approved EPDM
rubber parts.

The valve gate or closure member is typically in the form of a wedge made of cast iron material

so as to be sufficiently rugged so as to be suitable for high pressure and high flow applications.

In a resilient seat gate valve, the outer surface of the valve wedge is coated with an elastomeric

material so as to offer a bubble-tight seal even at elevated operating pressures.

The valve wedge is operated by turning a threaded stem so as to advance or retract the valve

wedge within the waterway of the valve housing.

Upon valve closure, the resilient material on the edge forms a bubble-tight seal with the internal

surface of the valve body. Dirt or other contamination in the valve operating system can lead to

incomplete sealing of the wedge or other malfunction.

Another object of the present invention is to provide a resilient seat gate valve having an

improved wedge operator system which readily overcomes the deleterious effects of contamination introduced either during construction or entrained within product carried to the valve.

These and other objects of the present invention which will become apparent from studying the

appended description and drawings are provided in a valve arrangement, that comprises a valve

housing that defines a water passageway and a valve seat within the valve passageway.

A valve wedge disposed within the housing passageway moves along a direction of operation

between a closed position in contact with the valve seat to block flow of water through the valve

passageway and an open position allowing flow of water through the valve passageway.

A pair of spaced apart tracks are disposed within the valve housing on either side of the wedge

and extend along the direction of operation. A pair of opposed wings carried on the valve wedge,

travel in each track. A valve stem coupled to the valve wedge moves the valve wedge in opposite reciprocating directions between valve open and valve closed positions.

General information

Rubber-coated shut-off wedge with sliding caps to reduce wear and tear and operation torques;
Maintenance free and corrosion resistant stem seal with O ring sealings;
Full passage, without contraction;
Bi-direction flow, tight in both directions;
Flange connection dimensions to EN 1092-2;
Body, cover and wedge made of ductile cast iron GGG40 according to DIN 1693;
Wedge fully vulcanized EPDM rubber;
Operating pressure: DN500 – DN600, PN10/PN16; DN700 – DN1200, PN10;
With self-locking gearbox, open and close limit stops and with position indicator;
Stem made of waste water resistant stainless steel grade 1.4401;
Replaceable stem nut made of zinc-free cast bronze;
Set for underground installation;

Resilient Seated Gate Valve FEATURES

⊙ Shot-blasting

protective surface finished by shot-blasting and the surface is smooth and neatness.

⊙ Flatting seat

Smooth continuous bore way without seating recess, it is not easy to get impurity pilled up.

Making the liquid straightway.

⊙ Treating with rubber

Both inner and outer are coated with advanced knowledge of rubber vulcanization then making

sure of the elasticity of rubber ,and make sure the exact geometry dimension. Rubber and ductile

cast iron valve hand together hardly. This can avoid fall-off due to long-term use.

⊙ Anti- corrosion

Both inner and outer are coated with non-toxic powder epoxy resin to strengthen the capacity of Corrosion resisting and raise the quality

of water supply.

⊙ Ruggedization

The older ductile iron valve is easy to rupture after being impacted by nonego. It can stop

rupture depend on the good mechanics capability of ductile iron .

Applications : This valve widely applied in the liquid pipes for opening or closing fixing in such

water, sewage disposal, electric power, energetics pipe , chemical, shipping, energy sources etc.

Shanghai KangQuan Valve Co. Ltd. is a specialized valves manufacture, which has 2,500 tons of 

valves output capacity annually. We pay much attention to the quality so our products are superior in 

quality compared with those of other manufacturers. After years of research and development, we have

accumulated a wealth of information and experience in this field. We enjoy a high reputation in dealing 

with both domestic and overseas trading.

Shanghai KangQuan Valve Co. Ltd.  covers an area of  15000 square meters. Our products line includes

various kinds of gate valves, globe valves, ball valves, check valves, cock valves, butterfly valves of , etc., 

up to the international advanced standards of ANSI, API, JIS, DIN, BS and so on . Materials mainly include

carbon steel ,stainless steel ,ductile iron and so on .with hand wheel worm-gear actuator and pneumatic

and electric actuator to be selected ,widely used in the industries of petrochemical, natural gas, metallurgy, 

electric power , pharmaceutical , construction, etc..

With highly qualified professionals and first class service, Shanghai KangQuan Valve Co. Ltd. has

established a highly respected enterprise which has been relied on for years. And we will continuously 

offer customers the most accurate and high quality delivery service possible.

Excellent quality assurance is our sales purpose, 
Competitive price is our sales policy, 
On time product delivery and responsive service is our standard.

Shanghai KangQuan Valve Co. Ltd. hopes to work together with you for a better future. Let’s work 

together building a mutually beneficial relationship that will last for years.