
Full Threaded Steel Self-Drilling R23/R32/R38/R51/T76
Hollow Anchor Rods for Mining
Anchor bolt
Anchor bolt means a rod that transfers the structures or geotechnical load to a stable rock formations,
it consists of rod, drill bit,coupling, plate, grouting stopper and nut. It has been widely used in tunnling,
mining,slope stabilization, tunneldiseasestreatment and roof supporting of undergroundworks. It is for
loose ground(clay, sand friable etc.) Hollow anchor rod is made of seamless tube with high strength.
Features of Hollow Grouting Anchor Bolt:
Hollow design, implement the grouting tube function, avoid the mortar loss when the traditional grouting
tube pulled out.Grouting full, and can achieve the pressure grouting to improve project quality.
Center is good, mortor can wrap the bolt body together, so that it can avoid corrosion to achibe along
term supporting purposes.
Easy installation, without onsite processing of threads. It can be easily installed an plate, nut.
Selt-Drilling Anchor Bolt Description
It may bodies drilling, grouting and anchoring as a whole.
It has a wide specifications. Diameter:25-130mm.
Qucik and easy construction, high efficiency.
Used invious surrounding rocks.
Anchor Bolt
R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
Outside diameter (mm) | 25 | 32 | 32 | 38 | 51 | 51 | 76 | 76 |
Internal diameter (mm) | 14 | 19 | 16 | 19 | 36 | 33 | 52 | 45 |
Ultimate load capacity (KN) | 200 | 280 | 360 | 500 | 550 | 800 | 1600 | 1900 |
Yield load capacity (KN) | 150 | 230 | 280 | 400 | 450 | 630 | 1200 | 1500 |
Tensile strength, Rp0.2 (N/mm2) | 800 | 800 | 800 | 800 | 800 | 800 | 800 | 800 |
Yield strength, Rp0.2 (N/mm2) | 650 | 650 | 650 | 650 | 650 | 650 | 650 | 650 |
Weight(Kg/m) | 2.3 | 3.2 | 3.6 | 5.5 | 6.5 | 8.0 | 16.0 | 19.7 |
Thread type (left-hand) | ISO10208 | ISO1720 | MAIT76 Standard | |||||
Steel grade | En10083-1 En10083-1(Alloy structure steel) | |||||||
Compared to carbon steel, alloy structure steel has high anti-corrosion capacity and high mechanical. |
Anchor Plate
R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
Dimention(mm) | 150*150 | 200*200 | 200*200 | 200*200 | 200*200 | 250*250 | 250*250 | 250*250 |
Thickness(mm) | 8 | 10 | 12 | 12 | 20 | 40 | 40 | 40 |
Hole diameter(mm) | 30 | 35 | 35 | 41 | 60 | 60 | 80 | 80 |
Weight(KG/PC) | 1.4 | 3 | 3.7 | 3.6 | 8.8 | 18.5 | 18 | 18 |
Cold deformed with geometry |
Anchor Coupling
R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
Outside diameter(mm) | 35 | 42 | 42 | 52 | 63 | 63 | 95 | 95 |
Length(mm) | 120 | 145 | 160or190 | 180 | 180 | 200 | 200 | 200 |
Weight | 0.45 | 0.7 | 0.75 | 1.4 | 1.7 | 1.9 | 6.4 | 6.4 |
Machined steel coupling middle stop |
Drill Bit
R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
diameter(mm) | 41,51 | 51,76,90 | 90,100,110,115,130 | 130,150,160,180,200 | ||||
Hardened cross bit (EX) | Hardened cross bit for loose to medium dense condition with small boulders. | |||||||
Tungsten cross bit (EXX) | TC cross bit for soft to medium rock for mations | |||||||
Hardened button bit (ES) | Hardened buuton bit for unconsolidated rock with boulders. | |||||||
Tungsten carbon button bit (ESS) | Button bit with TC inserts for medium rock for formations. | |||||||
Hardened arch bit (EC) | Hardened drill bit with optimized geometry for unconsoliddated soil with small boulders. | |||||||
Tungsten carbon arch bit (ECC) | TC drill bit with optimized geometry for soft to medium rock formations. | |||||||
Hardened drop center bit (EY) | Hardened cross bit for loose to medium dense ground conditions | |||||||
TC drop center bit (EY) | TC drill bit for soft to medium rock formations. | |||||||
Casting clay bit (EW) | Casting clay bit with optimized geometry for very soft to soft caly. | |||||||
Machined steel bit or Casring steel bit |
Anchor Nut
R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
Key size(mm) | 41 | 46 | 46 | 50 | 75 | 75 | 100 | 100 |
Length(mm) | 135 | 45 | 45 | 55 | 70 | 70 | 80 | 80 |
Weight(kg/pc) | 0.25 | 0.35 | 0.35 | 0.5 | 1.55 | 1.55 | 3.6 | 3.6 |
Machined steel nut or casting steel nut |
T-Thread Anchor Bolt Technial Data
Bar Type | Outside Diameter (mm) | Inside Diameter (mm) | Cross section (mm2) | Ultimate Load KN | Yield Point KN | Weight (kg/m) | Thread Left/ Right Hand |
30/11 | 30 | 11 | 446 | 320 | 260 | 3.3 | Lift or right |
30/14 | 30 | 14 | 395 | 260 | 220 | 2.9 | Lift or right |
30/16 | 30 | 16 | 382 | 220 | 180 | 2.7 | Lift or right |
40/16 | 40 | 16 | 879 | 660 | 525 | 7.0 | Lift or right |
40/20 | 40 | 20 | 726 | 539 | 430 | 5.6 | Lift or right |
52/26 | 52 | 26 | 1337 | 929 | 730 | 10.0 | Lift or right |
73/53 | 73 | 53 | 1160 | 1630 | 970 | 12.3 | Lift or right |
73/56 | 73 | 56 | 1094 | 1414 | 785 | 11.1 | Lift or right |
73/45 | 73 | 45 | 2265 | 1630 | 1180 | 17.8 | Lift or right |
1. Connect the alloy drill and anchor rod one end, on the other
end, connect the drill sleeve and shank adapter ,then connect the
drilling rig or hand-held drill. Then start drilling, fill the
cooling water while drilling.( If you want to lengthen the anchor
rod, can connect the coupling, and then drilling)
2. Take down the drill, put the stop-grouting plug into the rod,
and insert it to the hole, then ready to grout. Special
circumstances like surrounding rock grouting tension is over or
surrounding rock is too broken, can use anchor agent to seal the
hole.
3. Connect quick grouting coupling and anchor rod end, connect
other end of grouting machine.
4. Start grouting, when grouting full and reach design value then
power off . Grouting pressure according to the design parameters
and grouting machine performance determine ,Cement/sand reference
values is 1:0 ~ 1:1, water/cement reference value is 0.45:1 ~
0.5:1.
5. Install anchor plate and nuts, and tighten nuts.
KSQ Technologies (Beijing) Co. Ltd
KSQ Technologies (Beijing) Co. Ltd. has significant experience and know-how in the supply of materials, components, finished goods, specially designed/engineered equipment, and services from China. The company caters to medium to large scale clients who are doing projects and capital expansion, as well as to firms who require support with consumable products, maintenance, and repair operations.
Our operations are based on the unique expertise of our people and knowledge with customer processes. Our portfolio includes:
KSQ Technologies (Beijing) Co. Ltd. is a company that shall cater to the needs of the construction and mining industries, with consideration on providing solutions to the following unique problems:
Covering markets worldwide, KSQ Technologies (Beijing) Co. Ltd. is distinct due to its business missions:
KSQ is guided by the following values: