M10 stainless steel A2 DIN 931 Hex Head Bolts and Nuts

M10 stainless steel A2 DIN 931 Hex Head Bolts and Nuts

1.Product Description

Hexagonal bolt head and the screw fastener means consisting of bolts Material iron bolts and stainless steel bolts, that hex bolts

Hex cap screws are recognized by the washer faced bearing surface under the head. They are partially threaded with an unthreaded area referred to as the "grip". The minimum thread length is measured as twice the diameter plus 1/4" for screws 3/4" in diameter up to 6" long inclusive. These screws are cold form manufactured with rolled threads. When screw length is too short for the minimum thread length rule to apply, they shall be fully threaded.

Screws with a length longer than 6" have a minimum thread length of twice the diameter plus 1/2". The3se larger screws may be either hot or cold headed and the threads may be cut, rolled, or ground at the manufacturer's option. Hex cap screws are available in various grades of steel.

2.Specification

3.Application

Hexagonal bolts is the most widely used class of bolts. Its A and B grade bolt for important, high precision assembly and withstand greater shock, vibration or alternating load occasions. Its C-level bolt for the surface is rough, the assembly precision less demanding situations. Threaded bolt, are generally common thread, self-locking bolts West common thread is better, mainly used for thin-walled parts or to withstand shock, vibration or alternating load occasions. Occasions are generally made on the part of the thread bolt, Full thread bolt nominal length is mainly used for short and require longer threaded bolt

4.Advantages

1, connected by force, there are common and have the articulation hole. Articulation hole bolt hole to size and fit, when used by the lateral force.
2, according to the head shape hexagonal head, round, square head, countersunk head, and so the general Shen head with a place in the smooth surface is not required to connect the projection, because countersunk head can be screwed into the part in. Round to be screwed into the head part in. tighten the square head of the force can be a little bigger, but large in size. hex head is the most common.
In addition, to meet the needs of the lock after installation, there is a hole in the head, the stem portion with holes, these holes can not screw loose when subject to vibration.
Some did not bolt threaded rod to be meticulous, called the waist bolt. This bolt is conducive to change by force coupling.
There are special high strength bolts on steel. The head will become bigger and more dimensions have changed.
Another special use of: T-shaped slot bolt, with most of the machine tool fixture, special shape, to cut off the side of the head bolt for machine and fixed ground connection, there are a variety of shapes, U-bolts. , as described above, and so on.
There are special stud welding, a threaded one did not, you can weld the parts, tighten the nut on the other side directly.

Jiaxing Haina Fastener co. Ltd was established in 2010, located in the hometown of fasteners jiaxing city. For many years of export experience, our products has been best-selling in Europe, the United States, the Middle East and Southeast Asia. The products are manufactured by more functions machine, which is brought in domestic and foreign well-known enterprises. The products made are fully compatible with the international standards, well received by domestic and foreign customers. Through scientific management, Jiaxing Haina fastener Ltd company has been obtained ISO9000 certificate of Quality Managerment System, SGS and BV international certificate system of Make in China.

Product standards including DIN, ISO, GB and ASME/ANSI, BS, JIS AS. Main levels of carbon steel: 4.8, 4.8, 6.8, 8.8, 10.9, and 12.9 grade, the main material of stainless steel SS201, SS304, SS316 and various kinds of special stainless steel.

The width range of our products can be divided into auto fasteners, mechanical fasteners, construction fasteners, power fasteners, railway fasteners, household electrical appliances fasteners and chemical fasteners,

We have first-class service team, so we can meet the different requests for a set of customers. We solemnly commitment, first-grade quality, timely delivery guaranteed

Reasonable price and service paramount, forward to the operation principle of quality first and customer first, pursuit of excellence to create first-class brand, our aim is brand promoting development, management promoting earnings, warmly greeting home and abroad new and old customers to communicate and cooperate to seek greater success and brilliant future.